ST-520M ABS Plastic Mini Smart Dehumidifier

Overview: The intelligent dehumidification device uses semiconductor refrigeration dehumidification method, actively drawing humid air from enclosed space into the dehumidification air duct under the action of a fan. The water vapor in the air condenses into water after passing through the semiconductor refrigeration mechanism, and then is discharged out of the cabinet through the water conduit, achieving excellent dehumidification effect. When dehumidification function is not manually enabled: When the ambient humidity is higher than the maximum humidity value (humidity set value plus humidity differential value), the dehumidifier will automatically start dehumidification; when the ambient humidity is lower than the minimum humidity value (humidity set value minus humidity differential value), dehumidification stops. When dehumidification function is manually enabled: The dehumidification device will continuously maintain the dehumidification function until it is manually disabled. Applicable scenarios: Dehumidification inside various electrical cabinets such as high/low voltage cabinets, switchgear, ring main units, gas-insulated switchgear, box transformers, terminal boxes, communication cabinets, etc. Technical Parameters: Input Specification | 1 temperature/humidity input module Measurement Range | Humidity 0%RH-99%RH Resolution | Humidity 1%RH Control Mode | Position control Power Supply | AC/DC 85-260V Product Power | 20W when starting dehumidification Working Environment | Temperature 0-50℃, humidity ≤85%RH in non-corrosive places Basic Error | Humidity: ±3%RH (10%RH-90%RH), ±5%RH (0%RH-99%RH) Product Drawing: