EA900-DMF (Dimethylformamide)Fixed DMF (Dimethylformamide)Detector
Project Parameter
Key Features
- Project Parameter
Specifications
| Detected Gas DMF (Dimethylformamide) Two | |
| Detection Principle PID Photoionization Sensor | |
| Measurement Range 0 50ppm Optional 0 100ppm On-demand Customize Range | |
| Resolution 0.1ppm | |
| Detection Method Diffusion Type Optional Pump-suction Type | |
| Precision ≤±3%FS | |
| Response Time T90 ≤30s | |
| Zero Drift ≤±2% FS / month | |
| Alarm Method Field Highd BSound & Light Alarm Configurable One Early Warning Two Alarm | |
| Alarm can Setting Low 10ppm High 20ppm | |
| Signal Output 4-20m A Three Wire Type RS485 Modbus-RTU Optional Relay Output | |
| Supply Voltage DC24V | |
| Explosion-proof Rating Ex db II CT6 | |
| Protection Rating IP66 | |
| Shell Material Aluminum Explosion-proof Housing | |
| Display Method LCD LCDReal-time Display Concentration Temperature Alarm Status | |
| Working Temperature -20℃ +50℃ | |
| Working Humidity 10% 95% RH No Condensation | |
| Pressure Range 80 120k Pa | |
| Installation Method Wall-mounted Pipeline Installation | |
| Transmission Distance 4-20m A ≤1000m RS485 ≤1200m | |
| Size 180×140×90mm | |
| Weight 1.6kg | |
| Equipment Connectable Gas Alarm Controller Linkage Fan | |
| Calibration Method Field Single / Multi Calibration | |
| Sensor Life 2 3 year Normal |
